Advantages of Moisture Meter

 Easy handling

 Exact measuring results

 Automatic temperature correction

 High measuring range upto 30% moisture

 14 calibrations

Put the sample into the electrode and close it, select the product, press the measure button, read the result. The sample is ground and homogenised. Equipped as standard with a programme for temperature measurement in bulk material. Temperature gauge (accessory) available in 1m, 1.5m, 2m. More than 8,000 instruments sold worldwide

Advantages of Moisture Meter

 Easy handling & Exact measuring results

 Automatic temperature correction

 High measuring range & Sturdy construction

 Calibration approved in various countries

 Correspond to the EU-standard and to the International technical measurement recommendations OIML (Orgenisation International de Metrological Legale)

Grind the sample and put it into the electrode and close it, press the product key, read or print the result. In Germany they are the standard moisture meters of the grain acceptance. Especially suitable for the moisture measurement of humid maize (up to a moisture content of 46%) by means of the special electrode.

Advantages

 measuring and data collecting instrument

 storage of more than 600 measuring values

 serial interface (RS 232 C) & suitable for all Pfeuffer-measurement sensors

 storage of the measuring time

 adjustable temperature limit values

Connect the GTM 600 to the measuring sensors and switch it on. Press the measuring key.Temperature values are read and stored. They can be printed as protocoll afterwards. Limit values are marked with ''*''. Per measuring sensor up to 4 temperature values taken from different depths can be stored. Due to its small dimensions it can be carried easily during the check patrols through the grain store.

The Ohaus Moisture Analyser, a new approach to moisture determination!

Whether in the Lab or on production line, Ohaus gets results fast. The Halogen technology is up to 40% faster than infrared drying and offers you a temperature range of 50 to 200 degree C. An informative graphical display shows all information you need and the three different Auto shutoffs guarantee fast and repeatable results. These features plus a library to store up to 50 procedures makes the MB-45 the performance and value leader.

 Fast halogen technology

 Four different temperature profiles

 Large graphical LCD display

 Three shut-off modes

 Integrated database and RS232 interface

The full featured, compact moisture analyzer for every budget

Perfect for environment, quality control, food and beverage, chemical, pharmaceutical industries, and more! This fast, rugged analyzer gives you the flexibility you need and the accuracy you require for moisture determinations.

The MB45 combines state-of-the-art heating with highly accurate weighing technology to deliver a faster, more precise method of moisture analysis.

 Fast halogen element provides uniform heating up to 200 degree C.

 Superior analytical performance, with ready moisture and 45 gram capacity.

 Powerful software for ease of operation, program storage and user customization.

Powerful Software and Backlit Graphical Display

The user friendly software design of the MB45 simplifies operation as it walks you through the convenient test set-up parameters. The unique display allows you real time access to drying curve and results, at the touch of a button.

Advantages

 Fully automatic system

 Relay output & various output protocols

 Serial PC-interface & parallel printer interface

 Storage of the measuring time

 Adjustable temperature limit values & Intrinsically safe measurement circuits

Connect the GTM 600 to the measuring sensors and switch it on. Press the measuring key.Temperature values are read and stored. They can be printed as protocoll afterwards. Limit values are marked with ''*''. Per measuring sensor up to 4 temperature values taken from different depths can be stored. Due to its small dimensions it can be carried easily during the check patrols through the grain store.

The efficient and rapid laboratory screening machine for the grain trade, stores, maltsters, breweries, laboratories and mills. Efficient laboratory screening machine for sorting and quality assessment of cereals, legumes and oilseeds

The feature of the the Sortimat is the sieve stack which can be tilted. This avoids the dismounting of the sieves after each sorting. The sieve cleaning is carried out by means of elastic rollers

Features

 Determination of the boldness of brewing barley

 Quality assessment of cereals

 Available with 3, 4 or 5 sieves

 Solid construction

 Long service life & Maintenance free

The Viscomat works on the capillary principle, which is the most exact method for the determination of viscosity. The time, which is necessary for a defined volume of a liquid to pass throw a capillary at a known pressure differential and defined temperature is measured. A determination of the density is not necessary. Therewith the Viscomat allows a direct measurement of the dynamic viscosity. The resulting viscosity is indicated in millipascal-seconds (mPas).

Application : The Viscomat is optimised for use in breweries and malt houses. The results of beer and wort samples are converted automatically to a fixed original wort and extract content, if the original wort and extract contents of the samples had been entered beforehand.

Analysis of phenolic substances in beer, wort, extracts of malt and hops, wine, fruit juice and juice and vegetable extracts.

The Tannometer is equipped with a temperature controlled measuring chamber and a micro dosing device. The evaluation is made by means of an intergrated four-colour plotter or by means of the software Tannolab

Features

 Simple operation

 Comprehensive data

 Fast results

Advantages

 Fully automatic system

 Temperature and full level indication

 Two-wire bus system & relay output

 System monitoring & measuring cycle 120 sec

 Intrinsically safe measurement circuits

The Digital bus system DuoLine is for the fully automatic temperature and full level control in silos and storage halls. For the management of stock and quality parameters of stored goods. The DuoLine systems are suitable especially for medium and large plants due to the easy installation.

Electronic modules collect the temperature and full level values and convert them into signals, which are transmitted to the central unit by means of the digital bus. The central unit supervises the modules permantly, controls the measurement cycles and receives the temperature values as well as the full level signals.

Advantages

 Easy handling & sturdy construction (stainless steel)

 Handy and independent from the mains

 Well arranged in a compact suitcase

 Exact measuring values

 Intrinsically safe measurement circuits

The Digital bus system DuoLine is for the fully automatic temperature and full level control in silos and storage halls. For the management of stock and quality parameters of stored goods. The DuoLine systems are suitable especially for medium and large plants due to the easy installation.

Electronic modules collect the temperature and full level values and convert them into signals, which are transmitted to the central unit by means of the digital bus. The central unit supervises the modules permantly, controls the measurement cycles and receives the temperature values as well as the full level signals.

The friability determination is a rational evaluation of the general brewing quality of malt. For the determination of the friability immediately after the kilning process. The Friabilimeter separates the malt mechanically in hard and friable (smooth) parts.

 Fast and easy operation

 Sturdy construction

 Simplifies the malt analysis

 Empirically proven result of brewing value

Put 50 g of malt into the sieve drum. The grains are pressed, by means of a rubber roller, against the wire meshes with constant spring pressure.

Advantages

 No Grinding

 Fully Automatic

 Integrated Printer

 High Precision

 Easy Handling & Big Sample Volume

The Granomat is according to the international technical recommendations of the OIML (Organization for approved measuring); It belongs to category A, class II. The Granomat measures the capacity (dielectric constant) of the whole grain sample. It determines the moisture of the product as well as the bulk density (specific weight) of the whole corn. Grinding of the sample is not necessary. The Granomat can test all cereals, legumes, oil seeds, maize and malt. The memory stores up to 100 different calibrations. The sample volume is 600 ml.

The measurement is fully automatic. The user puts the sample into the funnel of the Granomat, chooses the requested product and presses the key MEASURE. The input of a sample identification is also possible. The Granomat fills the measurement cell automatically. This guarantees a constant bulk density. The stripping device removes the grains which are not necessary for the measurement and provides for a constant volume. The measurement of the capacity, weight and temperature of the sample is carried out within a couple of seconds. These three parameters have an influence on the result. The measurement cell is discharged and the sample falls into the drawer and can be used for further analysis. The Granomat indicates the measured product moisture, the bulk density (expressed in kg/hl) and the temperature of the sample and prints the results by means of the integrated printer.

Two serial and a parallel interface for the connection to an external printer or to a PC are integrated into the instrument. The Grano-mat carries out a self-test automatically and checks its accuracy by means of the measurement of internal comparative capacities after switching on. It is sturdy and maintenance-free. The modular construction gua-rantees a high ease of servicing.

New product curves can be programmed directly by means of reference samples with known moisture content via the PC-programme GranoMaster. The programme supports the graphic preparation of the calibration curve for the new product. It runs under Windows 3.11, Windows 95 and Windows NT.

For the determination of the weight per thousand corns of seeds and for the preparation of samples for germination and cultivation tests.

 For any grain sizes from 0.3 to 15 mm

 High counting speed & precise count

 Adjustable size and speed & low noise operation

For the rationalization of larger sample quantities we recommend the filling station Contapack, with carousel for bags and bottles (option). Seed counter CONTADOR The feed container is held in place by an electromagnet and vibration induced during counting. The material to be counted reaches the outlet and falls into the receptacle through a photoelectronic counter.

The Contador selects its counting speed automatically dependent on the size of the material to be counted. This guarantees optimum use of the counting capacity and reduces counting time to a minimum whilst maintaining count accuracy. Shortly before counting is completed the CONTADOR reduces its counting speed so that no more seeds are counted than have been preset. Counting speed may also be manually adjusted. The instrument can recognize when the receptacle or the feed container is absent, stops counting and reports the fact on the display so that no operating faults occur. Particles which are significantly smaller in size are not counted. Thus, for example, rape seeds in a sample of peas drop into the receptacle without being counted. By manually adjusting the seed size it is possible to control the counting of particles.

The display shows in automatic mode the preset quantity and the count so far. In manual mode it also shows the counting speed selected and the seed size. The keyboard is used to select various modes of operation, such as summation counting and differential counting. Display no. 1 for rape, seeds and small seeds. no. 2 for cereals, sunflower seeds and rye and no. 3 for maize, field beans and peas.

The semi-automatic filling station is an additional equipment for the seed counter CONTADOR.

 fills all kinds of paper or plastic bags, plastic or glass bottles

 choice of required quantity

 checks for missing bags or bottles

 offers continuous fill by immediate removal of filled bags or automatic stop when all the bags on the carousel are full.

Pour selected seed i.e. barley, into the correct feed container, for barley container 2 and place on Contador. Fit bags or bottles to each position on the carousel and secure with the clips. Select on the Contador the required quantity per bag to be filled and press the button to start. The Contador starts and counts the required number into the first bag. Bag change is signalled by a beep-tone. For longer runs replace the filled bags with an empty one as soon as it is filled (continuous operation).

For shorter runs a second carousel can be fitted with bags whilst the other is running on the machine. The carousels are changed over when the machine stops after filling the first 10 bags. The optional carousel stand makes this proceeding easier. This ensures minimum stoppage during the filling operation.

Via an electronic sensor the Contador knows automatically if a bag is in position or not and prevents the valuable seeds from being scattered on the floor. By this means it is also possible, for example, to fill only 3 or 5 bags on the filling station if required.